Systems design




In a single receiver residential installation there is a single coaxial cable running from the receiver set-top box in the building to the LNB on the dish. The DC electric power for the LNB is provided through the same coaxial cable conductors that carry the signal to the receiver. In addition, control signals are also transmitted from the receiver to the LNB through the cable. The receiver uses different power supply voltages (13 / 18 V) to select vertical / horizontal antenna polarization, and an on/off pilot tone (22 kHz) to instruct the LNB to select one of the two frequency bands. In larger installations each band and polarization is given its own cable, so there are 4 cables from the LNB to a 'multiswitch' switching matrix, which allows the connection of multiple receivers to the multiswitch in a star topology using the same signalling method as in a single receiver installation.citation needed

A satellite finder may aid in aiming the satellite dish. Professional satellite meters allow better dish alignment and provide received signal parameter values too.

Comments

Popular posts from this blog

25)Simply no Motorcycle Stunts, no Primary Guest: Several First Time Mademoiselle at Republic Day 2021

How to Use YouTube to Optimize Your Website

Satellite dish